25 ton Overhead Crane Specifications

taitai

25 ton overhead crane suitable use in middle and light working conditions.

Lifting speed can be with normal speed and slow speed, when work for presision lifting, it should choose the slow speed.

25 ton overhead crane standard specification:

• Lift capacity: 25 ton and below
• Lift height: 6 – 30m
• Span: 7.5m – 35m
• Work duty: M3 – M5
• Operate type: Cabin control, remote control, pendent switch control
• Power: 380V/50HZ/3P or based on the requires
• Lift speed: 0-8m/min, single speed, double speed or frequency control speed
• Traverse speed: 20 m/min
• Travel speed: 20,30m/min or frequency control speed
  

About 25 ton Overhead Crane Specifications

As a material handling equipment, the 25-ton bridge crane can be used for material lifting and transportation in many different industries. The crane uses reliable motors and accessories to ensure high-quality and safe work. Dongqi Crane is a professional crane manufacturer in China with 30 years of experience in the production of bridge cranes. The 25 ton bridge crane we provide can adopt single beam or double beam according to the customer’s working situation, and can be used for lifting or lowering configuration. All these cranes can be customized according to special requirements.

Comparison Table of 25 ton Overhead Crane

Overhead Bridge crane	Capacity	Span	Height	Coverage Area Type	Coverage Area	Motorization
Single Girder Overhead Crane	25 ton	7.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
Double Girder Electric Hoist Crane	25 ton	7.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
Double Girder Overhead Crane	25 ton	7.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
Low Headroom Single Girder Overhead Crane	25 ton	7.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
European Single Girder Overhead Crane	25 ton	6m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
European Double Girder Overhead Crane	25 ton	6m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
Explosion-proof Double Girder Overhead Crane	25 ton	7.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
Grab Bucket Overhead Crane	25 ton	10.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
Electromagnetic Overhead Crane	25 ton	10.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
Insulation Overhead Crane	25 ton	10.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
Double Trolley Overhead Crane	25 ton	10.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes
Ladle Crane	25 ton	10.5m ~ 31.5m	customize	Square/Rectangle	31.5m x Unlimited Length	Yes

The selection of specifications for single beam cranes is usually based on the actual weight and span of the required load. Here are some key points for selecting the specifications of a single beam crane:

• Span: The span of a single beam crane refers to the distance between the main beam of the crane and the track, usually measured in meters. When selecting the specifications of a single beam crane, it is necessary to consider the span. The larger the span, it is necessary to choose a larger crane to withstand greater weight.
• Load weight: The load weight of a single beam crane refers to the maximum weight that the crane can lift. When selecting the specifications of a single beam crane, it is necessary to select the appropriate crane based on the actual required load weight.
• Working level: The working level of a single beam crane refers to the load that the crane can withstand under different working conditions. The higher the working level, the higher the Factor of safety of the crane, but also the higher the price. Therefore, when selecting the specifications of a single beam crane, it is necessary to choose the appropriate crane based on the actual required working level.
• Special requirements: According to actual needs, it may be necessary to choose a single beam crane with special functions, such as explosion-proof, anti-corrosion, dustproof, etc. When selecting the specifications of a single beam crane, it is necessary to choose a suitable crane based on special requirements.
  

Single Girder Crane Specifications

• 1 Ton Single Girder Crane Specifications
  
• 2 Ton Single Girder Crane Specifications
  
• 3 Ton Single Girder Crane Specifications
  
• 25 ton Overhead Crane Specifications
  
• 30 ton Overhead Crane Specifications
  
• 100 ton Overhead Crane Specifications
  

How to customize Overhead Crane from China

We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a Overhead Crane, you can leave a message on the website or Email: sales010@cranesdq.com, tell us the following information, and our sales manager will contact you:

25 ton Overhead Crane Specifications