PROBE.NC from an external button. - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 3177|Reply: 3
Print Previous Topic Next Topic

PROBE.NC from an external button.

[Copy Link]

4

Threads

16

Posts

90

Credits

Registered member

Rank: 2

Credits
90
Jump to the specified floor
Landlord
Posted at 2022-2-23 16:37:09 | Only Author Replies reward |Descending browser |Read mode
Hello.How do I run a command PROBE.NC from an external button?
Reply

Use props Report

1

Threads

28

Posts

131

Credits

Registered member

Rank: 2

Credits
131
Sofa
Posted at 2022-2-24 14:30:28 | Only Author
1) Make copy PROBE.NC with name extkey1.nc or extkey2.nc.
2) Read page 72(including title page) of manual.
Reply Support Opposition

Use props Report

4

Threads

16

Posts

90

Credits

Registered member

Rank: 2

Credits
90
Bench
 Author| Posted at 2022-2-26 15:32:59 | Only Author
Thanks for the information.
Reply Support Opposition

Use props Report

4

Threads

16

Posts

90

Credits

Registered member

Rank: 2

Credits
90
Floor
 Author| Posted at 2022-2-26 15:46:29 | Only Author
Andrey. Thanks again for the help. Please tell me how the order of manualtoolchange is organized in this controller when the M6 command is received from the control program? Thank you in advance. With respect, Oleg.
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list