DDCS V3.1 & DD8727T4V1 - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 5587|Reply: 4
Print Previous Topic Next Topic

DDCS V3.1 & DD8727T4V1

[Copy Link]

1

Threads

2

Posts

27

Credits

Newbie Member

Rank: 1

Credits
27
Jump to the specified floor
Landlord
Posted at 2021-2-2 01:31:50 | Only Author |Only larger image Replies reward |Descending browser |Read mode
Hello.

How to connect a stepper motor driver DD8727T4V1 to a controller DDCS V3.1. The driver has a common + input for all PULL and DIR control signals. If you combine all the positive motor control ports of the controller (as in the picture), the motors either do not spin, or several motors are running simultaneously. The driver is OK. Tested with mach3 stb4100 usb board before and after connecting to DDCS V3.1.


Thanks






Reply

Use props Report

2

Threads

12

Posts

58

Credits

Registered member

Rank: 2

Credits
58
Sofa
Posted at 2021-2-26 17:42:32 | Only Author
Reply Support Opposition

Use props Report

1

Threads

2

Posts

27

Credits

Newbie Member

Rank: 1

Credits
27
Bench
 Author| Posted at 2021-3-1 01:10:00 | Only Author
I understood it. But I have a common anode stepper motor driver. How to connect it to DDCS?
Reply Support Opposition

Use props Report

0

Threads

1

Posts

4

Credits

Newbie Member

Rank: 1

Credits
4
Floor
Posted at 2021-3-1 22:23:16 | Only Author
Last edited by Richard In 2021-3-1 22:33 Editor

Hi.

You can not connect DDCS and DD8727T4V1 directly. But you can connect it with additional electronics. How to do this? I'm not sure because manual for DD8727T4V1 is not well prepare, have lack of information and is not perfect. I don't have this electronic. But i try to show how it can be. See my schema bellow.



You can see and test more by using your hand and multimeter.

Generally I not recommend using DD8727T4V1 with DDCS. If you have some more space in control cabinet buy 4 pcs TB6560 Stepper Driver. It's not much more cost, eg. https://pl.aliexpress.com/item/4000458970475.html but then you have not any problems in work.
Richard

Reply Support Opposition

Use props Report

2

Threads

12

Posts

58

Credits

Registered member

Rank: 2

Credits
58
5#
Posted at 2021-3-8 18:17:07 | Only Author
Last edited by Robchiks In 2021-4-30 17:41 Editor

I use this additional devices:https://s.click.aliexpress.com/e/_AEzLIJ (select PNP or NPN depending on how you need)


https://s.click.aliexpress.com/e/_AMemaQ


Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list