Mpg wont work - DDCSV2.1 - Standalone CNC Motion Controller - Digital Dream Technology support
View: 7184|Reply: 6
Print Previous Topic Next Topic

Mpg wont work

[Copy Link]

1

Threads

2

Posts

7

Credits

Newbie Member

Rank: 1

Credits
7
Jump to the specified floor
Landlord
Posted at 2020-3-15 06:16:42 | Only Author Replies reward |Descending browser |Read mode
I have a ddcsv 3.1 with mpg I bought as a set. Qhen I plug in the mpg nothing works . The motors estop nothing. The estop is enabled  and all the seeting for mpg I ja e tried every combination. Any ideas. The green light is on so it has power. And I checks that all the wires have continuation.
Thanks
Reply

Use props Report

1

Threads

2

Posts

7

Credits

Newbie Member

Rank: 1

Credits
7
Sofa
 Author| Posted at 2020-3-15 09:47:15 | Only Author
Solved...I did not realize that the mpg need the xoma ports energized....
Reply Support Opposition

Use props Report

0

Threads

1

Posts

4

Credits

Newbie Member

Rank: 1

Credits
4
Bench
Posted at 2020-3-30 22:37:47 | Only Author
Good morning. I have a same controller and have the same problem, you can shared whit me how you solved it, my email is alondono862@misena.edu.co
Best Regards.
Reply Support Opposition

Use props Report

0

Threads

2

Posts

36

Credits

Newbie Member

Rank: 1

Credits
36
Floor
Posted at 2020-4-19 00:55:49 | Only Author
Last edited by gerhard In 2020-4-30 17:58 Editor

Hi Alll.
My MPG is working exept for the Y-Axis. Even the keypad is working 100% .Looks like a setting isue.
Also when I use the probe function, the probe will go up by 5mm instead of down. Looks like another wrong setting on my side.
Please can someone help.

Reply Support Opposition

Use props Report

0

Threads

2

Posts

14

Credits

Newbie Member

Rank: 1

Credits
14
5#
Posted at 2020-4-20 17:38:22 | Only Author
Hello,

What are the XOMA ports?

-B
Reply Support Opposition

Use props Report

0

Threads

2

Posts

14

Credits

Newbie Member

Rank: 1

Credits
14
6#
Posted at 2020-5-5 04:30:01 | Only Author
I solved my problem, this had to do with adding a second power supply for the limits and home switches.
Reply Support Opposition

Use props Report

1

Threads

3

Posts

9

Credits

Newbie Member

Rank: 1

Credits
9
7#
Posted at 2020-8-11 07:01:11 | Only Author
tenho o mesmo problema aqui..vc rsolveu?
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list