G-code is not executed. - DDCSV2.1 - Standalone CNC Motion Controller - Digital Dream Technology support
View: 6322|Reply: 2
Print Previous Topic Next Topic

G-code is not executed.

[Copy Link]

2

Threads

4

Posts

110

Credits

Registered member

Rank: 2

Credits
110
Jump to the specified floor
Landlord
Posted at 2019-1-30 13:25:58 | Only Author Replies reward |Descending browser |Read mode
Hello,

I assembled a homemade milling machine, trying to launch the g-code, brings the machine to the reset state, in manual mode, the mill can move on all 3 axes without noticeable problems.

About the machine, I used a combination of HBS860H (driver) + 86HBS85-120 (hybrid servo motor),
machine control takes place through DDCSV 2.1 with the latest firmware.

If anyone encountered a similar problem, I will be glad to any advice.
Reply

Use props Report

9

Threads

44

Posts

343

Credits

Intermediate Member

Rank: 3Rank: 3

Credits
343
Sofa
Posted at 2019-1-30 16:21:57 | Only Author
May be, there is a syntax error in your G-Code. If you post it here, we can have a look.
You mentioned, that you can move the spindle in MPG mode, so I assume, the end switches are configured correct and do not stop the movement. But you should double check this also!
Reply Support Opposition

Use props Report

2

Threads

4

Posts

110

Credits

Registered member

Rank: 2

Credits
110
Bench
 Author| Posted at 2019-1-31 11:32:15 | Only Author
Thanks for the quick reply, immediately after your message I checked the Hardware limits, looks fine, then simply deactivate them, the machine executed the G-code without any errors. apparently, something was wrong in the parameters.
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list