Three HD type 5-ton overhead cranes and European electric wire rope hoists so...

taitai

HD overhead crane procurement parameters

• Order time: 2022.9.15
• Lifting capacity: 5 ton
• Lifting height: 4.5 m
• Span: 14 m
• Working voltage: 220v/60hz/3p
• Order content: HD 5 ton overhead crane（without main beam）*3
• Exporting country: Mexico
  

This is an order for overhead cranes sold to Mexico in 2022. The customer purchased three HD type 5-ton overhead cranes from our crane factory, paired with European electric wire rope hoists. According to the customer's requirements, all three overhead crane motors use SEW brand products. The order was placed at the factory on September 16th, and the motor arrived on November 11th. On December 13th, we sent the product photos to the customer for confirmation, and on December 16th, we sent the weight information to the customer for confirmation. We will ship the product to Mexico on January 2, 2023. The atlas shows the various components of three overhead cranes and some details of European electric wire rope hoists in the factory. If you would like to learn more about HD overhead cranes and the latest prices for 5 tons of overhead cranes, please contact us.

HD Overhead Crane Introduction

HD crane is a kind of low headroom crane, usually used in factory workshops with low space height, which can effectively use the space height and increase the lifting height.

The HD electric single-girder crane is independently developed and designed on the basis of introducing advanced European design and manufacturing technology and combining the latest domestic standards such as GB3811-2008 and JB/T1306-2008. The appearance is beautiful, and the driving mechanism adopts KONE three-in-one reducer (hard tooth surface reducer, frequency conversion brake motor), which is completely comparable to similar European products in terms of appearance and technical performance. Its superior performance is reflected in the mature application of modular design, frequency conversion speed regulation, automatic detection and other technologies, and various protection functions such as overload protection, overcurrent protection, and voltage loss protection make the electric single beam more perfect.

HD electric single-girder crane is suitable for working in the environment conditions of working level A3～A5, working environment temperature -25℃～+40℃, relative humidity ≤85% and no flammable, explosive or corrosive medium. The lifting capacity is 1-16 tons, and the span is 7.5-25.5 meters. The crane power supply is three-phase AC with a rated frequency of 50Hz or 60Hz. The rated voltage is 220V ~ 660V. The upper and lower limits of the allowable voltage fluctuation of the motor are ±10%, and the internal voltage loss of the crane is not more than 3%.

Three HD type 5-ton overhead cranes and European electric wire rope hoists sold to Mexico in 2022