3 ton European-spec Double Girder Overhead Crane for sale to Hong Kong China

taitai

We have completed the installation of a double girder overhead crane to Hong Kong, China, which is a 3 ton overhead crane, Model QDX, using ABM motor for hoist, Siemens motor for crane travelling.

European type Double girder overhead crane parameters

• Rated capacity: 3t
• Span: 16.06m
• Lifting height:11m
• Power supply: 380V 50Hz 3P
• Pendant control and remote control
• ABM motor for hoist
• Siemens motor for crane travelling
  

Note:

• Our offer includes supply of complete crane.
• Rails and bus bar system are not included, and can be provided upon client’s request.
• Installation service is not included and can be provided upon client’s request.
  

Technical information

Rated capacity		t	3
Lifting height		m	11
Span		m	16.06
Speed	Trolley traveling speed	m/min	5.0~20 (Inverter control)
	Bridge traveling speed		10.0~40 (Inverter control)
	Main hook lifting speed		0.8/5.0 (Double speed)
Working class		/	FEM 2M
Power supply		V/Hz	380/3/50
Trolley traveling power		KW	2*0.25
Bridge traveling power			2*0.75
Hoisting power			0.45/3.2
Total power			5.65
Total Weight		t	7.1
Max wheel load		KN	36.8
Protection class		/	IP55
Insulation grade			F
Ambient temperature		/	-20℃ ~ +40℃
Electrics (contactors)		/	Schneider contactors
Hook type		/	With spring loaded Safety Latch and should have 360° rotation.
Steel Material		/	Q235B
Color		/	Bright yellow
Paint		/	Galvanized
Anti-collision system		/	Included
Phase protection relays		/	Included
Limit switch		/	Included
Voltage Low Protect device		/	Included
Emergency stop action		/	Included
Ground fault protection		/	Included
Short-circuit protection		/	Included
Over-heating protection		/	Included
Power-off protection		/	Included
Over-current protection		/	Included
Overload protector		/	Included
Top Quality Buffer		/	Included
Cross Power		/	C Track Festoon Cables
Country of origin		/	China

Recommended Rail Specifications:

Type	Top Width(mm)	Bottom Width(mm)	Height(mm)	Weight(kg/m)
P24	51	92	107	24.95

Overhead Crane Finished Installation

(The above picture is for reference to crane model only)

European-spec Double Girder Overhead Crane has advanced technology and is designed in accordance with international standards: DIN (Germany), FEM (Europe), ISO (International). It has the advantages of strong rigidity, light weight and outstanding structural design, which can effectively save plant space and Investment cost, unique walking structure characteristics, is your best choice.

European-spec Double Girder Overhead Crane is widely used in workshops, warehouses and other material handling occasions in machinery manufacturing, metallurgy, petroleum, petrochemical, ports, railways, civil aviation, electric power, food, paper, building materials, electronics and other industries. It is especially suitable for material handling, precision assembly of large parts and other occasions that require precise positioning, and the working environment temperature is -25-40 ℃.

European-style double-girder bridge cranes are intelligent equipment, and a variety of functional interfaces are reserved to make function expansion easier;

The European-style double-girder bridge crane has more reliable performance and lower failure rate, which can reduce the cost of use and post-maintenance, and the service cycle can be as long as go years, without worries. Single girder cranes usually refer to single girder overhead cranes. The main beam of the single-girder crane bridge is mostly made of I-shaped steel or a combined section of steel and steel plates. Lifting trolleys are often assembled with chain hoists, electric hoists or hoists as lifting mechanism components.

The European-style double-girder overhead crane has advanced control technology and high-quality key components, which can ensure that the overall performance of the crane is more reliable, the crane starts and runs smoothly, without impact, and has a good mute effect, which can reduce the harm of noise. Single girder cranes usually refer to single girder overhead cranes. The main beam of the single-girder crane bridge is mostly made of I-shaped steel or a combined section of steel and steel plates. Lifting trolleys are often assembled with chain hoists, electric hoists or hoists as lifting mechanism components.

3 ton European-spec Double Girder Overhead Crane for sale to Hong Kong China