|
|
Hi there, I try this program on two ddcsv2.1, same version 2019-05-109NOR :
T4 M6
G0 X41.593 Y-34.675
G43 Z4.5 H4
G94 G18 G3 X36.593 Z-0.5 I-5. K0. F600.
On the first DDCSV it works, and I have Z=-0.5 at the end.
On the second, it does not start, if I remove the line T4 M6, it starts, but Z=-4.5 at the end and I haven't radius.
help would be much appreciated
Pascal
|
|
Posted at 2022-12-10 00:55:08
Favorite