Pin for enabling / disabling stepper motor drives - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 5126|Reply: 4
Print Previous Topic Next Topic

Pin for enabling / disabling stepper motor drives

[Copy Link]

4

Threads

13

Posts

130

Credits

Registered member

Rank: 2

Credits
130
Jump to the specified floor
Landlord
Posted at 2020-10-7 23:16:13 | Only Author Replies reward |Descending browser |Read mode
How to send a command to the driver to activate before starting work and to inactivate after work?

You can use the pins, PIN 24 "XHOME", PIN 7 "YHOME" for other functions, as in the case of activating the stepper motor driver, that is, using the command "Enable / Power all stepper motors" and "M18: Disable all stepper motors "?

Thank you
Ricardo
Reply

Use props Report

0

Threads

23

Posts

80

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
80
Sofa
Posted at 2020-10-20 09:38:28 | Only Author
Dear Ricardo, I think what you need is Enable signal from the controller. Now for standard controller, this signal is not avaliable.
Reply Support Opposition

Use props Report

0

Threads

23

Posts

80

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
80
Bench
Posted at 2020-10-20 09:39:26 | Only Author
Dear Ricardo, I think what you need is Enable signal from the controller. Now for standard controller, this signal is not avaliable. and then you want to change the Home signal to Enable signal for each axis?
Reply Support Opposition

Use props Report

4

Threads

13

Posts

130

Credits

Registered member

Rank: 2

Credits
130
Floor
 Author| Posted at 2020-11-15 23:02:17 | Only Author
Hi!
Yes, exactly that, because the home signal can be used in the limit limit signal, so the home signal could be used to activate the drivers.
Reply Support Opposition

Use props Report

4

Threads

13

Posts

130

Credits

Registered member

Rank: 2

Credits
130
5#
 Author| Posted at 2020-12-8 08:33:37 | Only Author
How to activate this option?
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list