Trouble homing on version 2020-03-06-112 - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 2294|Reply: 0
Print Previous Topic Next Topic

Trouble homing on version 2020-03-06-112

[Copy Link]

1

Threads

6

Posts

43

Credits

Newbie Member

Rank: 1

Credits
43
Jump to the specified floor
Landlord
Posted at 2021-11-11 05:41:02 | Only Author Replies reward |Descending browser |Read mode
Last edited by mellbo In 2021-11-12 21:23 Editor

I have DDCS 3.1 on my CNC 3020 machine, 2 limit switches/axe NC with 0.1nF capacitor in paralel of every switch. 2 individual DC source and 1 for force power motors conform with user manual. All input is wired with shielded cable, aprox 2.5m lenght.

Not sure what is wrong, but  The controller performs the home search correctly, and it seems to move the small back distance, but then after that it sometimes starts going in the positive direction until I hit estop.    This problem occurs if I home all three axis (sequentially) or even if I try to home an individual axis.

How can I do ?...
Here is one video with this problems: https://youtu.be/unS-YabfOjI
Reply

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list