DDCS V4.1 network is no longer working - DDCSV3.1 Standalone CNC Motion Controller - Digital Dream Technology support
View: 1580|Reply: 0
Print Previous Topic Next Topic

DDCS V4.1 network is no longer working

[Copy Link]

1

Threads

1

Posts

9

Credits

Newbie Member

Rank: 1

Credits
9
Jump to the specified floor
Landlord
Posted at 2023-4-24 17:11:48 | Only Author Replies reward |Descending browser |Read mode
We have DDCS V4.1 with last firmware 2023-03-21, installed three or four weeks ago.
Until today, the network worked without any problems. Today after turning on DDCS 4.1, it did not connect to the network.. When powering on, the orange LED near the RJ-45 blinks 3-4 times, then lights orange. The green one does not blink, it does not light. Changed the patch cord, switches - did not improve.
Reply

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list