One CNC Post Processor

Chip

Hi,
I have a DDCS v3.1 controller installed on my router, I use "One CNC Mill" CAD,CAM at work for running my Mikron Mill. The CAD CAM software has many stock post processors to generate the NC file, I have tried using "Mach3" and the machine does some weird things (I am not convinced that this post processor post is correct). I can write my own post processor with this software but I have no examples of files that work. Has anybody got a sample program I can have or provide any help.
Many thanks
Chip

cdemar

In fusion 360 I tend to select the most basic post proc. Typically this is called basic gcode. Also GRBL works just fine. Really you just want plain gcode without all the crap that other post have in it.

cdemar

In fusion 360 I tend to select the most basic post proc. Typically this is called basic gcode. Also GRBL works just fine. Really you just want plain gcode without all the crap that other post have in it.

Chip

Got it sorted now, it was the G02 G03 Circular was set to Absolute rather than Incremental, works perfectly now, thanks for the reply.