|
|
Last edited by heeweonkwon In 2022-6-27 22:18 Editor
The product I use is DDCS V3.1.
I need homing using G28 or G53.
Y AXIS has no motor connected.
When the start button is pressed, X, Z AXIS returns to normal, but
A AXIS stops near the return point and does not return normally.
However, if I use the button menu, all functions are normal.
For reference, I want to implement all functions in GCODE.
Of course, this is what happened while writing GCODE even now.
The X and Z axes are set to 0.000, but A axis is not set to 0.000.
And, I don't use the Y axis.
This is a video for reference.
https://youtu.be/NMqZ0wmNPNg
|
|
Posted at 2022-6-27 22:07:16
Favorite
Author