|
|
Greetings everyone,I'm finding some precision problems with arc machining on a CNC lathe controlled by DDCS Expert V 1.1
The Arc isn't smooth and appears lot of "square steps" on the part made. I used the same tool and G-Code I use in another machine (Travis - fagor controlled) with no problems.
I changed the params #73 #74 #75 and #247 and it show almost no difference. I'm wondering if it could be a problem with the controler that canot manage to work with Z and X axis at same time to make Arcs
This are how the params are set
#001 4000 (X axis)
#003 800 (Z axis)
#73 Software
#74 0.010
#75 0.000
#221 0.000
#247 0.001
|
|
Posted at 2024-5-24 21:39:19
Favorite