Set home offset

neel8440924

there is no way to do a home offset. my mach has the X axis home at full pos (right side) forcing me to use right for zero vs left. is there any way to add a home offset. I guess in g54 it does not matter anyway but it would be nice

ytliu

In the home process, when the Home signal is checked, the machine coordinates are set to home offset instead of 0. Is this what you expect?

neel8440924

Thanks for reply, yes this is exactly what i need.

ytliu

neel8440924 Posted at 2018-9-4 14:20
Thanks for reply, yes this is exactly what i need.

Ok. We will add this feature to the new version.

neel8440924

ok thanks, happy to see new features added everyday keep up the good work

Will_D

Regarding the original post:

Is this because of your hardware i.e only 1 limit switch on the X axis?

neel8440924

Will_D Posted at 2018-9-6 21:51
Regarding the original post:

Is this because of your hardware i.e only 1 limit switch on the X axis ...

yes, i use inductive proximity switch npn SN04 for homing sequence which is placed on right side, but i also have mechanical limit switches on both sides.

ytliu

neel8440924 Posted at 2018-9-6 22:52
yes, i use inductive proximity switch npn SN04 for homing sequence which is placed on right side,  ...

Ver:2018-09-07-100 Description:
1. Increase the home offset configuration.

neel8440924

ytliu Posted at 2018-9-7 07:02
Ver:2018-09-07-100 Description:
1. Increase the home offset configuration.

thanks for the update, it works correctly as expected