Homming from program

Franklin

Hi. I need that the machine automatically start the homing procedure when start the program. How can i do this? Thanks.

mirek151

position #126 Home after booting.  yes or no.

config.pandora-cnc.eu

Franklin

I know this parameter. I need the machine to do homing from G-code like M101 for probe.

JPoepsel

Hi!

It's only a guess, but it may be you can use this

M101
G91 G01 …
M102
G04 P0


functionality not only for probe but also for the other range sensors. You may give it a try - or wait until ytliu awakes frome his hibernation...

Franklin

Hi. I still need the homing when the program start. Can you help me?

ytliu

Ver:2019-04-28-108 Description:
1. Increase homing instruction support, M105/M106/M107/M108 are used for X/Y/Z/A homing operation respectively;

Note: If these instructions appear on the first line of G-code, the software will skip it and will not execute it. To avoid this, you can add a line of instructions before it, such as G04P0.
if you need the homing when the program start，you can write this:
G04P0
M107;Z-axis Homing
M105;X-axis Homing
M106;Y-axis Homing
...;Your G-code

Franklin

Thank you very much, it works well, but before homing
axis Z go to Z00 and sometimes reaches the Z limit.
How i can disable G00Z0 before start the programm? Thanks.

ytliu

Before starting the program, the system will first call safez.nc, you can empty the contents of safez.nc and then reinstall it into the system.

Franklin

Thank you very much. Its works!