Mpg wont work

Will

I have a ddcsv 3.1 with mpg I bought as a set. Qhen I plug in the mpg nothing works . The motors estop nothing. The estop is enabled  and all the seeting for mpg I ja e tried every combination. Any ideas. The green light is on so it has power. And I checks that all the wires have continuation.
Thanks

Will

Solved...I did not realize that the mpg need the xoma ports energized....

Cuervoal

Good morning. I have a same controller and have the same problem, you can shared whit me how you solved it, my email is alondono862@misena.edu.co
Best Regards.

gerhard

Hi Alll.
My MPG is working exept for the Y-Axis. Even the keypad is working 100% .Looks like a setting isue.
Also when I use the probe function, the probe will go up by 5mm instead of down. Looks like another wrong setting on my side.
Please can someone help.

BradDBrad

Hello,

What are the XOMA ports?

-B

BradDBrad

I solved my problem, this had to do with adding a second power supply for the limits and home switches.

edison

tenho o mesmo problema aqui..vc rsolveu?