DM500 hanging with bizarre behaviour - DM500 - Handheld 3-4 Axis CNC Moiton Contr - Digital Dream Technology support
View: 4856|Reply: 4
Print Previous Topic Next Topic

DM500 hanging with bizarre behaviour

[Copy Link]

1

Threads

3

Posts

13

Credits

Newbie Member

Rank: 1

Credits
13
Jump to the specified floor
Landlord
Posted at 2020-3-3 04:58:09 | Only Author Replies reward |Descending browser |Read mode
We have a DM500 with DIGITAL DERAM written on it. I am having an issue that it gets into a situation where it behaves normally, you can move the machine around, browse files, etc. but if you run any file it will just hang, and the only way to get it to do something else is to power cycle it.

It seems to pollute USB memory sticks the first time it hangs, so that if it once went wrong with this memory stick it will never work with that stick again, no matter  how you format or repartition the stick it still won't work whatever gcode you give it, but often a new memory stick will.  

Are there any firmware updates that could fix this or is it likely to be a hardware issue? It is currently on a 2018 version of the firmware
Reply

Use props Report

5

Threads

56

Posts

316

Credits

Super Moderator

Rank: 8Rank: 8

Credits
316
QQ
Sofa
Posted at 2020-3-3 08:08:10 | Only Author
Hello there
Download the confident upgrade package as follows:
http://bbs.ddcnc.com/forum.php?m ... &extra=#pid1010

Also, you can try another U disk. The file format of the U disk must be FAT format.

Reply Support Opposition

Use props Report

1

Threads

3

Posts

13

Credits

Newbie Member

Rank: 1

Credits
13
Bench
 Author| Posted at 2020-3-4 07:01:24 | Only Author
Thanks I will try the firmware upgrade.

I have tried many USB memory sticks (all FAT32), and they work for a bit until the DM500 crashes, then they stop working. It is getting expensive in USB sticks.
Reply Support Opposition

Use props Report

5

Threads

56

Posts

316

Credits

Super Moderator

Rank: 8Rank: 8

Credits
316
QQ
Floor
Posted at 2020-3-4 08:15:27 | Only Author
Hello there
Can you check if the USB port has poor contact?
If there is vibration during processing, the system will freeze. There may be a problem with the hardware, you can consider replacing the hardware!

Reply Support Opposition

Use props Report

1

Threads

3

Posts

13

Credits

Newbie Member

Rank: 1

Credits
13
5#
 Author| Posted at 2020-3-5 05:26:29 | Only Author
We are going to try replacing the USB port, so that may help.
Reply Support Opposition

Use props Report

You need to log in before you can reply Login | Register now

This forum Credits Rules

Shenzhen Digital Dream Numerical Technology Co., Ltd. support
Adress:507,A Building,Leibo Industry Zone,No. 22 Jinxiu East Road,Kengzi Street,Pingshan district,Shenzhen City,P.R. of China
Phone:13244704799
E-mail:info@ddcnc.com

TEL

0755-87654321

Wchat

Website designed by DigitalDream Technology Support
Quick Reply Back to top Back to list