Feedrate , Spindle and Rapid Override setup and connection

ytliu

The installation package in the accessory expands the function of the external button. Now there are 3 options. When the configuration is 2, the system will execute extkey1.nc when the external button 1 is pressed, and the system will execute exekey2.nc when the external button 2 is pressed. You can write these two files and install them into the controller. (Copy these two files to the install directory of the u disk, insert the u disk into the controller, and then power it on)

ytliu

Mehmet Posted at 2018-7-25 20:38
Sorry , I don't understand  2 external button wired into the DDCSV  I am confused about wired and  ...

Please follow the diagram to connect the expansion key 1 and 2

ytliu

Nikolay81 Posted at 2018-7-26 17:09
What should be written in the file exekey2.nc so that the external button toggles the step mode (0 ...

Sorry, you can't implement the function you requested with the nc code. If you need it, I can add a configuration.

ytliu

Nikolay81 Posted at 2018-7-27 04:00
It's hard for me to describe some things with words. I do not know much English. It's better to s ...

Hi Nikolay81,
Don't worry, I can visit Youtube.