Digital Dream Technology support

Title: DM500t3/DM500t4 handheld CNC controller is on the market!!! [Print This Page]

Author: ytliu Time: 2018-11-13 20:41
Title: DM500t3/DM500t4 handheld CNC controller is on the market!!!
Last edited by ytliu In 2018-11-13 22:09 Editor

• Max. 4 Axis;2-4 Axis linear interpolation,any 2 axis circular interpolation;

• 7 opto isolated digital outputs,8opto isolated digital inputs;

• Support every Input and output port definition by users;

• The controller need 2 power supply,one power supply is for system power,one is for input and output ports power.Both input power is 24V,2A;

• Open-collector output, Max.output current is 500mA,can power the relay directly;

• Differential Pulse and direction output signal,Max. 500Khz per axis;

• Spindle Control: 3 I/O ports control 8 different speeds(3 lines 8 speeds),1 I/O control the Start/Stop;

• The System Support standard G-code.Also Support the popular CAD/CAM software,such as ArtCam,MasterCam,ProE and so on;

• USB flash disk support for G code file input;

• The control system can preview the process path before machining,and it makes the system more steady,workingsmoothy and precise;

• Acceleration/Deceleration Mode: S curve;

• Support un-limited size file for machining;

• Manual/Automatic machining function;

• Support the operation to Start a G code from a specific line;

• Support for “Power Cut” recovery. Data is automatically saved;

• Support time-lock function;

• Support 4 kinds operation rights:visitor,operator,admin,super admin.

• Support modbus RTU protocol

DM500 Motion Controller user Manual:

DM500 Motion Controller user Manual.pdf (1.5 MB, Down times: 1925)

Author: jjae6 Time: 2018-11-17 05:18
Hi, i read some errors in manual page 31. Extended Input and Output Ports Table:
Inputs port Y01 to Y07 should be M501/M601 to M507/607 ? and
Output port X02 should be M702/M802 ?

Author: jjae6 Time: 2018-11-25 03:55

enjoy_cnc Posted at 2018-11-17 20:35
Hello jjae6
Thank you for taking the time to carefully read our brochure.
The correct M-code corresp ...

Not at all, It’s my pleasure.
But I have seen another error... I don't know if it means anything in English .. But in front of your DM500 controller I read DIGITAL "DERAM", instead of DIGITAL "DREAM". If it is an error, they should change all the stickers they could as soon as posible, this would give a more professional touch.

PD: My English is not my first language and I also make many mistakes.

B/R
jjae6.

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)