Digital Dream Technology support

Title: Creating a custom G-command [Print This Page]

Author: Nikolay81 Time: 2018-11-2 22:24
Title: Creating a custom G-command
On the latest firmware, creating custom G-command does not work.
For example, I need a command G130.
For this, I add the following text to slib.nc:
O9130
G90 G1 X15 F500
G90 G1 X0 F500
M99
But the G130 command does not work from G-code.
What am I doing wrong?

slib.rar

1.77 KB, Down times: 806

Author: pantonov Time: 2020-6-14 15:34
Здравствуйте, Николай! Успели сделать G130? Моя попытка тоже не работает. Буду признателен, если поделитесь опытом.

Author: pantonov Time: 2020-6-15 01:29
Нашел: #2043=1

Author: awdesq Time: 2020-8-10 19:59
#2043=1 not work

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)