Title: G0 speed too slow [Print This Page] Author: gmillwater Time: 2021-9-22 22:43 Title: G0 speed too slow My rapid move using manual control is as expected. But when running any code, my G0 movement is at G1 speed. I've changed just about everything and no matter what I do, my G0 is always at the same speed (slow).
Sample code:
G20
G91
G0 Z-1.00
M30
Also, when I restart, the z axis runs down to zero then back up to -0 again. Weird...
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)