Title: RMHV3.1 Malfunction [Print This Page] Author: Anthogro Time: 2021-9-7 07:26 Title: RMHV3.1 Malfunction Just purchased the rmhv3.1 five months ago and recently had a power outage and the rmhv3.1 reset. When powered back on everything booted up fine, but had no functionality beyond switching to file and parameter page. I reinstalled latest patch (2020) then had to reconfigure all parameters to defaults (everything was set to 0) and was able to regain manual control, but when I issue command for all axis to GoTo 0 or start a cut file, nothing happens and controls freeze up and none of the commands or buttons do anything. Additionally, MPG works but the y and z selection works only on x axis and the x selection works only on y axis. Not sure whats going on or how to fix it. Everything was working fine up to the reset.
Is there a way to reset the rmhv3.1 to factory? The update shows installed from main page however I still see other directories with files. Is that normal or should I only be seeing the install folder in main directory? Any help greatly appreciated. Author: Anthogro Time: 2021-9-24 22:18
awesome support site, almost 3 weeks and no response. I'll be taking my business somewhere else. Thanks for nothing.Author: Anthogro Time: 2021-9-24 22:19
awesome support site, almost 3 weeks and no response. I'll be taking my business somewhere else. Thanks for lack of info, instructions and trouble shooting guide.
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)