Can one do this with the 3.1 controller (as it is powered with 24V and not 12V)?
It seems that connecting a solid state relay does work with a light bulb but my plasma torch does not react.
I dońt know what.
Someone here to help me?
Best regards,
Heiko Author: grasvezel Time: 2021-8-8 18:32
The outputs switch to ground, not to the positive power supply voltage. Therefore it should make no difference if the unit is powered with 12V or 24V. So the short answer is: Yes, this should work.
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)