Title: Speeds [Print This Page] Author: Enfama Time: 2021-5-21 05:55 Title: Speeds Soy nuevo en CNC y estoy aprendiendo.
Acabo de comprar e instalar para 3 ejes, el DDCSV3.1 con versión 2020-03-06-112. Al configurar los parámetros, verifico que los parámetros # 100, # 101 y # 102 son inútiles, ya que aunque modifique los valores, no tienen ningún efecto en la velocidad de los motores manualmente.
¿Podría explicar las diferencias y la utilidad de las velocidades: FRO, SRJ y F. ?? No entiendo por qué 3 velocidades diferentes.
Author: ShaniaDDream Time: 2021-5-21 09:02
FRO: Feeding adjust: During the operating process, the F value is already set, if we need to adjust the current feeding speed, then just adjust FRO value to realize it.
SRO: Spindle speed adjust: During the operating process, the S value is already set, if we need to adjust the current spindle speed, then just adjust SRO value to realize it : Current Speed S#=setting S*SRO.
SRJ: speed adjust manually during the operating process, as the manual speed is already set, if we need to adjust the current speed, here it is impossible to fix the value during it is working, then we can revise the SRJ value to realize it. Current manual speed FS#=Setting manual speed*SRJ.
F: Feeding speed, and its unit is mm/min. For example F=200, it means every minute feeding 2000mm. Author: Enfama Time: 2021-5-22 06:34
Got it OK. Thank you very much.
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)