This is an order for overhead cranes and electric hoists to be sold in Cyprus in 2021. The customer purchased 2 sets of HD type 5 ton overhead cranes (without main girder), 1 set of MD type 3 ton electric wire rope hoist and 1 set of MD type standstill electric wire rope hoist from our crane factory. The HD type overhead crane is matched with the European electric wire rope hoist, which can improve the clearance utilization rate of the factory workshop. The order is for a construction site in Cyprus. We placed an order at the factory on June 15th, completed all production by August 9th, and shipped it to Cyprus on September 2nd, which took 2 months and 18 days. The atlas shows some details of European hoist and MD electric wire rope hoist and end beam in the factory. If you want to know more about HD overhead crane and the latest price of 5 ton overhead crane, please contact us.
HD Overhead Crane IntroductionHD crane is a kind of low headroom crane, usually used in factory workshops with low space height, which can effectively use the space height and increase the lifting height.
The HD electric single-girder crane is independently developed and designed on the basis of introducing advanced European design and manufacturing technology and combining the latest domestic standards such as GB3811-2008 and JB/T1306-2008. The appearance is beautiful, and the driving mechanism adopts KONE three-in-one reducer (hard tooth surface reducer, frequency conversion brake motor), which is completely comparable to similar European products in terms of appearance and technical performance. Its superior performance is reflected in the mature application of modular design, frequency conversion speed regulation, automatic detection and other technologies, and various protection functions such as overload protection, overcurrent protection, and voltage loss protection make the electric single beam more perfect.
HD electric single-girder crane is suitable for working in the environment conditions of working level A3～A5, working environment temperature -25℃～+40℃, relative humidity ≤85% and no flammable, explosive or corrosive medium. The lifting capacity is 1-16 tons, and the span is 7.5-25.5 meters. The crane power supply is three-phase AC with a rated frequency of 50Hz or 60Hz. The rated voltage is 220V ~ 660V. The upper and lower limits of the allowable voltage fluctuation of the motor are ±10%, and the internal voltage loss of the crane is not more than 3%.
Introduction to MD type two-speed electric hoistMD type double-speed electric hoist is a light and small lifting equipment, which has the advantages of compact structure, light weight, small volume, strong versatility of parts, and convenient operation. It is mainly used to cooperate with single-girder bridge crane to pull items. The reducer adopts hard tooth surface transmission design, which has long service life and high mechanical efficiency. The motor adopts a conical rotor brake motor, with up and down two-way safety limit device.
The lifting speed of the CD1 electric hoist is normal speed, which can meet the general use requirements; the MD1 electric hoist has two lifting speeds: normal speed and slow speed. When working at a slow speed, it can meet the requirements of fine operations such as loading and unloading, sand box mold closing, and machine tool maintenance. Therefore, the range of use of the MD1 electric hoist is wider than that of the CD1 electric hoist.
HD Type 5 Ton Overhead Crane and MD Electric Wire Rope Hoist Sold to Cyprus in 2021
| Welcome Digital Dream Technology support (http://bbs.ddcnc.com/) | Powered by Discuz! X3 |