Digital Dream Technology support

Title: 3t European-spec Single Girder Overhead Crane (HD Model) for sale to Haiti [Print This Page]

Author: taitai Time: 2023-10-13 10:45
Title: 3t European-spec Single Girder Overhead Crane (HD Model) for sale to Haiti

We have completed 1 order for a 3 ton overhead crane from Haiti. This is a HD type single girder overhead crane, the main beam adopts Welded box-section beam, mainly use material Q235B carbon structural steel strong and elegant, easy to maintain. Three-layer painting.

Single Girder Overhead Crane parameters

Lifting capacity=3T
Lifting height=9.144m (30ft)
Span=12.192m (40ft)
480V 60Hz 3P
FEM 2M (ISO M5)
Pendant and remote control

Note:

Our offer includes supply of complete crane.
Installation, commissioning & site testing:not included.
Crane rail and bus bar system are not included. Quotation can be provided upon client’s request.

Technical information

Lifting capacity		t	3
Lifting height		m	9.144
Span		m	12.192
Speed	Cross traveling speed	m/min	2-20 (inverter control)
	Crane traveling speed		2-20 (inverter control)
	Lifting speed		0.8-5.0 (inverter control)
Working class		/	FEM2M (ISO M5)
Power supply		V/Hz/Ph	480/60/3
Cross traveling power		KW	0.37
Crane traveling power			2*0.37
Hoisting power			3.0
Total power			4.11
Max wheel load		KN	23.5
Total weight		Kg	2350
Protection class		/	IP54
Insulation grade		/	F
Ambient temperature		/	-20℃~+40℃
Anti-collision system		/	Included
Phase protection relays		/	Included
Limit switch		/	Included
Voltage Low Protect device		/	Included
Emergency stop action		/	Included
Ground fault protection		/	Included
Short-circuit protection		/	Included
Over-heating protection		/	Included
Power-off protection		/	Included
Over-current protection		/	Included
Overload protector		/	Included
Top Quality Buffer		/	Included
Cross Power		/	Festoon Cables
Country of Origin			China

Recommended Crane Rail Specification (not included in the offer)

Type	Top Width(mm)	Bottom Width(mm)	Height(mm)	Weight(kg/m)
P18	40	80	90	18.06

Overhead Crane Finished Installation

(The above picture is for reference to crane model only)

QD type hook bridge crane is a general-purpose bridge crane for trolleys. The crane relies on the longitudinal movement along the direction of the supporting track on the driving beam of the workshop, the lateral movement of the trolley and the lifting of the hook to realize the working process. The common lifting capacity is 5 tons-600t , working level A3A4A5-A8. There are three types of bridge crane operation modes: ground control, control room control and remote control for users to choose.

3t European-spec Single Girder Overhead Crane (HD Model) for sale to Haiti

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)