Lifting capacity | t | 5 | ||
Lifting height | m | 7 | ||
Span | m | 18 | ||
Speed | Cross traveling speed | m/min | 2-20 (inverter control) | |
Crane traveling speed | 2-20 (inverter control) | |||
Lifting speed | 0.7/4.0 (double speed) | |||
Working class | / | FEM 2M | ||
Power supply | V/Hz/Ph | 480/60/3 | ||
Cross traveling power | KW | 0.55 | ||
Crane traveling power | 0.55*2 | |||
Hoisting power | 1.2/7.6 | |||
Total power | 10.45 | |||
Max wheel load | KN | 61.9 | ||
Weight of main girder | KG | 4400 | ||
Total weight | 6350 | |||
Protection class | / | IP55 | ||
Insulation grade | / | F | ||
Ambient temperature | / | -10℃~+40℃ | ||
Anti-collision system | / | Included | ||
Phase protection relays | / | Included | ||
Limit switch | / | Included | ||
Voltage Low Protect device | / | Included | ||
Emergency stop action | / | Included | ||
Ground fault protection | / | Included | ||
Short-circuit protection | / | Included | ||
Over-heating protection | / | Included | ||
Power-off protection | / | Included | ||
Over-current protection | / | Included | ||
Overload protector | / | Included | ||
Top Quality Buffer | / | Included | ||
Country of origin | / | China |
Rail Specification
Type | Top Width(mm) | Bottom Width(mm) | Height(mm) | Weight(kg/m) |
P22 | 50.8 | 93.66 | 93.66 | 22.3 |
(The above picture is for reference to crane model only)
QD type hook bridge crane is a general-purpose bridge crane for trolleys. The crane relies on the longitudinal movement along the direction of the supporting track on the driving beam of the workshop, the lateral movement of the trolley and the lifting of the hook to realize the working process. The common lifting capacity is 5 tons-600t , working level A3A4A5-A8. There are three types of bridge crane operation modes: ground control, control room control and remote control for users to choose.
5t European-spec Single Girder Overhead Crane (ABM& Siemens motor) For Sale To UAE
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/) | Powered by Discuz! X3 |