Digital Dream Technology support

Title: Installation of 5 ton overhead crane for Peshawar, Pakistan [Print This Page]

Author: taitai Time: 2023-6-16 10:01
Title: Installation of 5 ton overhead crane for Peshawar, Pakistan

We have more than ten years of crane service experience in Pakistan, today we share a case of 5 ton overhead crane installation from Peshawar, Pakistan.

Design overhead crane process for Pakistani customers

When communicating with the customer, the customer put forward the following requirements for the overhead crane:

Lifting capacity:5tons
Lifting height:4m
Span:8.2m
Power:400v,50hz,3phase

At the same time, the customer proposed that the motor should use a world-class brand, the track should use square steel rail, and the height from the load-bearing beam to the roof, as well as the working requirements and working frequency were proposed.

After researching all the customer’s requirements, we made the following design for the customer:

European overhead crane drawings

Why design European single girder overhead cranes for customers

Low clearance, small dimension
Light dead weight.
Provide more effective working space
Importing configuration, ABM motor, Schneider electrics , Schneider inverter, TIMKEN USA bearing, GG Italy pendent controller and France wire rope etc.
Double lifting speed and inverter traveling speed

As the customer require the crane urgently also, so we arranged the production right after the acceptance of the official letter of credit. With the cooperation of Sales Department, Technical Department, Production Department and Quality Testing Department, we finished the production of the single girder overhead crane in 20 days, which makes the customer very satisfied.

Production and installation of 5 ton single girder overhead crane

According to our company standard, we packaged the hoist and other electrics parts by wooden box, girders by plastic bags.

As the overhead crane will be delivered by 40ft container. So in order to protect the crane damaged from the shaking during the shipment, so we fixed the crane by wire rope also.

5 ton overhead crane in China crane factory

Trolley hoist in China crane factory

5 ton single girder overhead crane is packed and ready to be sent to Pakistan

Customer installed the crane by themselves according to our installations specifications and electrics drawings.During the installations, they have little difficulty in connecting the hoist electrics, so we offered our electrics engineer’s mobile soon, and let them talked directly.Finally, they finished the installations successfully, and happily sent the installation pictures to us.

The others 5 ton overhead crane case in Pakistan

How to customize Overhead Crane from China

We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a Overhead Crane, you can leave a message on the website or Email: sales010@cranesdq.com, tell us the following information, and our sales manager will contact you:

Lifting capacity (ton): __ ?( The rated capacity)
Lifting height (m):__ ? (Height from hook center to the floor)
Span (m): __ ? (Distance between rail center)
Lifting speed (m/min): __ ? ( Single, Dual, Variable)
Traveling distance (m): __ ? (The length of the rail)
Work duty: __ ? (How many hours a day? How many times an hour?)
What material to be lifted: __ ?
Industrial voltage: __ ? ( like :380V, 50Hz, 3ph )

Installation of 5 ton overhead crane for Peshawar, Pakistan

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)