Title: DM500 hanging with bizarre behaviour [Print This Page] Author: daveansell Time: 2020-3-3 04:58 Title: DM500 hanging with bizarre behaviour We have a DM500 with DIGITAL DERAM written on it. I am having an issue that it gets into a situation where it behaves normally, you can move the machine around, browse files, etc. but if you run any file it will just hang, and the only way to get it to do something else is to power cycle it.
It seems to pollute USB memory sticks the first time it hangs, so that if it once went wrong with this memory stick it will never work with that stick again, no matter how you format or repartition the stick it still won't work whatever gcode you give it, but often a new memory stick will.
Are there any firmware updates that could fix this or is it likely to be a hardware issue? It is currently on a 2018 version of the firmware Author: enjoy_cnc Time: 2020-3-3 08:08
Hello there
Download the confident upgrade package as follows: http://bbs.ddcnc.com/forum.php?m ... &extra=#pid1010
Also, you can try another U disk. The file format of the U disk must be FAT format.
Author: daveansell Time: 2020-3-4 07:01
Thanks I will try the firmware upgrade.
I have tried many USB memory sticks (all FAT32), and they work for a bit until the DM500 crashes, then they stop working. It is getting expensive in USB sticks.Author: enjoy_cnc Time: 2020-3-4 08:15
Hello there
Can you check if the USB port has poor contact?
If there is vibration during processing, the system will freeze. There may be a problem with the hardware, you can consider replacing the hardware!
Author: daveansell Time: 2020-3-5 05:26
We are going to try replacing the USB port, so that may help.
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)