Title: Reset "Total working time" [Print This Page] Author: Kopf Time: 2020-1-28 22:25 Title: Reset "Total working time" Hello, I noticed my DM500 has 64 hours already in "Total working time". How can I reset it? I didn't find this option in the manual.
ThanksAuthor: enjoy_cnc Time: 2020-1-31 19:53 Last edited by enjoy_cnc In 2020-1-31 21:50 Editor
Hello there
Are you talking about the time at the top of the screen? The time at the top of the screen is the cumulative start-up time. If the use period of the handle is set, the start-up time is automatically cleared. There is no other way to clear it.
The software is as follows:
There are operating instructions, the software language is Chinese.
FOINNC system registration machine V1_2
Steps:
1: Get the System ID;
Enter the "para page" interface of the controller, press "Advanced", "Lifetime setting" "System ID" in turn to pop up the system serial number and remaining time.
For example, the following serial numbers:
FOINNC-0150-9d8301b6f5106490-0000
2: Double-click to open the software "FOINNC system registration machine V1_2.exe";
3: Enter the serial number of the first step into the serial number of the software board information column;
4: Set the use time. If the use time is not limited, enter -1, if it is limited, enter an integer between 1 and 9999;
5: Modify the handle super user password (default can be used)
This password can be distinguished from different manufacturers. Please keep it in a safe place. If you change the superuser password, please enter the controller "para page"-"Advanced"-"Password Settings"-"Super Administrator Password Settings"
Note: The factory default super management password is 888888;
6: Generate a registration code file;
Click the [Generate Registration Code] button. If the entry is correct, a registration code file with the file name "fkey" will be generated in the register software folder;
7_1: Decrypt the handle (automatically);
Copy the fkey file to the root directory of the USB flash drive, insert the USB flash drive interface of the handle and power on again, the handle will be decrypted automatically; you can follow the first step to check the new remaining time after booting;
7_2: decrypt the handle (manually);
Copy fkey to the root directory of the USB disk-insert the USB disk
Enter "para page"-"Advanced"-"Lifetime setting"-"Lock or unlock"
Note: After the remaining time is less than 48 hours, you will be prompted when the machine is turned on;
Fkey file will be deleted automatically after successful decryption;
If the decryption is unsuccessful, please check whether the serial number and super user password are entered correctly;
Author: Kopf Time: 2020-2-1 18:01 Last edited by Kopf In 2020-2-1 18:47 Editor
Thanks for your answer.
The question was about the "cumulative time". Strange that it was around 64 hours when the device was received, would this indicate the device has been used before? Author: enjoy_cnc Time: 2020-2-1 19:30
Hello there,
This time is the aging test time before leaving the factory, and each one is not 0!
Author: Alexey Time: 2020-5-26 00:29
Hi i have problem, I set the image to download and the remote control freezes at startup, what should I do?
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)
