Digital Dream Technology support

Title: DDCSV2.1 and NVMPG Serial MPG [Print This Page]

Author: JoDa Time: 2018-3-13 05:10
Title: DDCSV2.1 and NVMPG Serial MPG
Hello,

I'm trying to get the DDCSV2.1 and the NVMPG serial MPG working. The wiring is correct...(RXD & TXD are 'swapped') but I cannot get it to work.
The MPG mode of the DDCSV2.1 is set to serial. I even have measured teh DDCSV2.1-TXD signal with an oscilloscope but no pulses are coming out.

Has anybody some experience with an serial MPG ? Can it work together ?

Author: admin Time: 2018-3-13 19:11
DDCSV2.1 does not support NVMPG, only support standard MPG ,sorry

Author: JoDa Time: 2018-3-14 03:43
Is any other type of serial MPG supported ?
So what does parameter #430 do ?

Author: a_l_e_x_Z Time: 2018-4-1 16:58
And the new firmware will support NVMPG ???
What should I do to those who bought such a lot https://ru.aliexpress.com/item/D ... p;priceBeautifyAB=0

Author: admin Time: 2018-4-2 09:07

a_l_e_x_Z Posted at 2018-4-1 16:58
And the new firmware will support NVMPG ???
What should I do to those who bought such a lot https:// ...

Hi Alex,the DDCSV2.1 don't support the NVMPG.If you need a MPG you can go to buy a standard MPG.But not this one.

The MPG is suitable for our another controller,not this one.

Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)