Title: Software updates [Print This Page] Author: gjh Time: 2019-4-18 09:09 Title: Software updates The stated procedure for updating is to have the USB key plugged in before power-up. This doesn't work - at least, not for me. What I have to do is power-up and then quickly insert the USB key. Is this a known problem?Author: ytliu Time: 2019-4-21 06:38
Thank you for your feedback, the questions you mentioned, I have not encountered before.Author: ytliu Time: 2019-4-23 19:21
When the power is turned on, the system will automatically copy all the files in the u disk install directory to the /mnt/nand1-1 directory, so if there is a setting file in the install directory of the u disk, it will overwrite your previous settings.
In addition, since there is no real-time clock module in the DDSC, the system date is reset to 1970 after each boot, so after the file copy is completed, their dates are all 1970.Author: ytliu Time: 2019-4-23 20:19
If you have multiple configuration options to manage, you can create set files, such as plan1.set, plan2.set,..., you can define different parameters in these files.
For example, the contents of plan1.set are as follows:
&&
#50=150
&&
The content of plan2.set is as follows:
&&
#50=100
&&
You can edit and generate your set files at http://config.pandora-cnc.eu/.
How to use the set file: Go to the file page, move the cursor to the set file you need, such as plan1.set, and then press Enter. At this time, RESET will flash, then press PAGE-R to enter the parameter page. Will see #50 has become 150.
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)