Title: After completing home parameter setting, the a-axis does not change to 0.000. [Print This Page] Author: heeweonkwon Time: 2022-6-27 22:07 Title: After completing home parameter setting, the a-axis does not change to 0.000. Last edited by heeweonkwon In 2022-6-27 22:18 Editor
The product I use is DDCS V3.1.
I need homing using G28 or G53.
Y AXIS has no motor connected.
When the start button is pressed, X, Z AXIS returns to normal, but
A AXIS stops near the return point and does not return normally.
However, if I use the button menu, all functions are normal.
For reference, I want to implement all functions in GCODE.
Of course, this is what happened while writing GCODE even now.
The X and Z axes are set to 0.000, but A axis is not set to 0.000.
And, I don't use the Y axis.
Author: heeweonkwon Time: 2022-6-27 22:17
This is a video for reference. https://youtu.be/NMqZ0wmNPNgAuthor: davidwilly Time: 2025-4-8 20:05
Plumbing Service Group offers fast and reliable emergency plumbing services 24/7. Our experienced plumbers are equipped to handle all urgent issues, from burst pipes and severe leaks to clogged drains and malfunctioning water heaters. We prioritize swift response times and efficient solutions to minimize damage and restore your plumbing system quickly. Trust plumbing service group experience for professional, dependable emergency plumbing assistance whenever you need it.
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)