Title: Ddcsv 3.1 setup [Print This Page] Author: Peterkzn Time: 2022-5-24 21:08 Title: Ddcsv 3.1 setup In Mach 3 and 4 it is possible to start your steppers with a ramp up and ramp down, so the movements are smoother and no sudden stops and starts. Is it possible to do the same with ddcsv 3.1? If so which are the settings for this. Thanks.Author: AndreyB Time: 2022-5-25 02:20
You mean linear acceleration? If yes, then
#45-#48, #263-#266, #99, #124, #2031
Welcome Digital Dream Technology support (http://bbs.ddcnc.com/)